Airbrush
Stencils makes airbrushing as easy as 1-2-3.
Stencils come in a variety of designs, perfect
for all ages and occasions. Our stencils are
made from Long Lasting, Durable, Easy-Clean,
10 Millimeter Mylar. Our stencils come with
stencils and a full color laminated display
sheet.
To apply airbrush tattoos:
1. Take hold of your airbrush with your free
hand and position it so that it is about three
inches in front of the stencil. Keeping your
airbrush in an upright position, push down on
the trigger with your index finger. If you have
a dual action airbrush you will push down and
pull back on the trigger simultaneously. Doing
so will allow you to moderate the flow of paint
as you pull back on the trigger.
2. As the paint starts to flow, begin to move
the airbrush along with the cuts in the stencil.
If the cuts are horizontal, you will want to
move your airbrush from left to right. If the
cuts are vertical, you will want to move your
airbrush up and down. 3. Coat the exposed
areas of the skin (within the cuts of the
stencil) with just one coat of paint. Over
coating will not cause the tattoo to last
longer, and it will hinder the drying process.
If you have over coated the area you can dry
the paint out by spraying the area with air
only. You can accomplish this by pushing down
on the trigger only (in this case do not pull
back on the trigger).
4. Once you have completed the area within
the open “V”, gently “walk”
your fingers over to the next area of the
stencil you wish to paint. You will want to
overlap each area slightly.
5. After you have completed the tattoo, remove
the stencil and view the tattoo to ensure
that it is up to par. |
